Echo Retro (NHM-130)

(2 customer reviews)

$2,195.00

With its sleek, retro design and dual filtration system, the Echo Retro is the perfect addition to your countertop. The same great Echo technology in a smaller design. Start experiencing all of the benefits Echo Hydrogen-Enriched Water™ from the Echo Retro.

Out of stock

SKU: ENHM Category:

-

ECHO RETRO

MANUAL

The manual covers essential product information to help you get the most out of your Echo Retro.

HELPFUL VIDEOS

 

INSTALLING YOUR FILTER

We walk you through how to install a filter on any of our Echo Water® Machines.

COMMON QUESTIONS ABOUT THE ECHO RETRO

HOW MANY PPM WILL I GET WITH MY ECHO RETRO?

The Echo Retro will produce 0.8 to 1.2 ppm of hydrogen. Keep in mind that these numbers will vary depending on your water source. Hard water will result in a reduction of hydrogen concentration over time. You will need to clean your Echo Retro in order to remedy this issue. Also keep in mind that you only need 0.5 ppm to receive the therapeutic benefits. If you drink four 16-ounce glasses of Echo Hydrogen-Enriched Water™ at 1 ppm, that equals 4 ppm to the body because there is a stacking effect.

HOW DO I KNOW WHEN TO CHANGE MY FILTER?

The Echo Retro does not have a filter change indicator. However, each filter contains an RFID chip that monitors how much water has passed through the machine and is connected to the filter display. Once a filter has expired, the machine will only turn on for 10 seconds and then shut itself off. The Echo Retro has a date replacement on the actual filter where you can write the date you last replaced it, so you can keep track of the months. You should replace the Echo Retro Carbon Block Filter every six months, and the Echo Retro Hollow Fiber Filter every 12 months.

HOW DO I REPLACE MY FILTER?

Replacing your filter is easy. First, shut off the adapter and middle valve, and drain the water from the machine by pushing the water dispenser until no more water comes out. Unplug your machine, and remove the side panel on the machine. To remove the filters, first tilt the filter cartridge up, untwist it, and pull the cartridge down to remove it. Insert the new filter cartridge by inserting the end of the cartridge at an angle, twisting it into place, and pushing it down into the machine. Repeat the same process for your second filter. Slide the side panel back into place and fasten the screws. See detailed instructions in your user manual.

WHAT KIND OF MAINTENANCE WILL I HAVE TO DO FOR THE ECHO RETRO?

When you choose to get an Echo Water® Machine, you’re choosing to invest in your health and your life. While most machines require very little maintenance, regular preventive cleanings will ensure the machine lasts longer. If you live in an area with hard water, this may reduce the concentration of hydrogen being infused into your water over time. To remedy this, clean your machine regularly.

Weight 9.5 lbs
Dimensions 14 × 4.5 × 13.25 in

2 reviews for Echo Retro (NHM-130)

  1. Jena Garcia (verified owner)

    trying it each day for me and the dog, starting slow and working up the amount. So far I love it, and wonder how long the hydrogen gas remains in my water? Do I need to drink it all right away? Any info is appreciated!

    • Paige White-Stahle

      Great question! The hydrogen will last in an open glass for about three to five hours, so you don’t need to drink it right away to see the benefits. Just drink the water within a few hours of dispensing it from the Retro. So for your dog, you should replace the water about 3 times a day to keep hydrogen in the bowl.

  2. Glen Williams

    It’s so important to us to have access to good water, The ECHO system from Synergy Science not only provides that, but it’s the only system out there that dissolves H2 into the water. Having learned of the countless benefits of Molecular Hydrogen (H2) it made getting an ECHO one of the easiest & best decisions we made for our family.

Add a review

Your email address will not be published.

Scroll to Top